Lactoseptin FOAM

• Ferment ООО

AA — Chlorhexidine bigluconate — not less than 0.25%

Solution for topical use. Used for pre-milking treatment of the skin of udder milk tubes in cows.

The agent is a transparent liquid, colorless to light yellow, with a specific smell. Presence of light opalescence may be observed during storage. High solubility in water. Concentration of hydrogen ions in the agent (pH): 6.0-8.0. Relative density (20°C) —1.0-1.2 g/ml.

Composition

Active agent lactic acid — not less than 0.25%, auxiliary substances: Glycerol (glycerine) up to 5.0%, amino oxide alkyl polyglucoside, alkylamine carboxylate, amphoteric surfactant.

Advantages

• ready-made solution;

• thick foam ensures effective cleaning of even very dirty udder;

• treatment of udder skin due to glycerine;

• optimal preparation of the udder for milking.

Efficiency

• cost-effective (foam consumption is 2 times less than liquid consumption);

• safe for work, harmless for people and animals;

• effective preparation for milking - quicker and more efficient milking of animals;

• reduced bacterial load.

Mechanism of action

Chlohexidine bigluconate included in the product is a chlorine-containing derivative of biguanide. It has strong and quick anti-microbial effect on most gram-positive and gram-negative bacteria; it is also effective in relation to mycoplasm, as well as protozoans and fungi.

Amphoteric surfactant included in the agent ensures thorough cleaning of the milk tube skin due to formation of fine persistent foam.

Glycerine included in the agent moisturizes the skin of the tube.

How to use

After forestripping, milk tubes of the cow's udder are treated with foam-forming sanitary and hygienic agent "Lactoseptin FOAM". The use of this agent guarantees compliance with the required hygienic norms before milking, as well as formation of the milk ejection reflex, making it possible to produce the maximum volume of milk during milking with high hygienic parameters.

Use of the solution:

• Fill two thirds of a plastic cup for application of the solution.
  

• Create abundant foam by pressing on the soft plastic part of the cup several times.
  

• In order to achieve better results, apply foam-forming Lactoseptin FOAM solution on the entire surface of the milk tube, including the base of the udder.
  

• Leave the foam-forming solution on for 30 seconds to remove dirt and then thoroughly remove foam using individual tissues.
  

• The use of individual tissues is required to prevent distribution of pathogenic microflora between cows.
  

• Always use clean cups for application of the foam-forming solution and make sure that the automated milking operator's hands are clean during milking.

Precautions

When working with the agent, comply with the safety rules, use individual protection means: protective clothes, rubber gloves and eyes/facial protection means.

Do not smoke, drink or eat during performance of works.

In case of contact with skin or mucous membranes, immediately wash off the agent with running water.

In case of an accident or if feeling unwell, seek medical attention immediately (if possible, show the label of the product to the doctor).

Keep out of reach of children.

It is not allowed to transport or store the agent with food products and forage and use tare from the agent for household purposes.

Used solutions of the agent can be drained into sewage subject to compliance with the requirements of SanPiN 2.1.5.12-43-2005. Unused products, waste or empty canisters may be thrown away with household waste.

Safety interval

Terms of slaughter of animals for meat production, use of milk and other animal farming products after use of the agent are not limited.

Shelf life

Useful life of the agent on condition of compliance with storage conditions in the factory package is 1 year.